AfterShot 3.5 Update AND New Camera Profiles!

AfterShot 3.5 Update AND New Camera Profiles!

Hello AfterShot users! We are excited to announce the availability of many new camera profiles, along with a software update. The new camera profiles are listed below and can be downloaded from the Get More tab in-app. Then just restart AfterShot and you’ll be on your way. For Linux users, visit our Downloads page to download these and other camera profiles.

Update 5 is now available for AfterShot 3 and AfterShot Pro 3. This update addresses a number of reported issues related to stability, camera module and plugin installation, lens correction and more. For more details, and to download the free update, head over to our Updates page or look for your in-app notification.

NEW Camera Profiles

Now available from the Get More tab or visit our downloads page.

CANON

Canon EOS 800D
Canon EOS Rebel T7i
Canon EOS Kiss x9i
Canon EOS 2000D
Canon EOS Rebel T7
Canon EOS 77D
Canon EOS 9000D
Canon EOS 200D
Canon EOS Rebel SL2
Canon EOS 4000D
Canon EOS T100
Canon EOS M100

FUJIFILM

Fujifilm X-T20

LEICA

Leica C-Lux

NIKON

Nikon D850

OLYMPUS

Olympus E-M10 Mark III

PANASONIC

Panasonic Lumix TZ200
Panasonic Lumix GX9
Panasonic Lumix ZS200

PENTAX

Pentax K-1 Mark II
Pentax K-1 Mark II (DNG)
Pentax KP
Pentax KP (DNG)

SONY

Sony Alpha A7 III
Sony Alpha A9
Sony DSC-RX100 VI

Want to try out AfterShot Pro for FREE?

Download your FREE 30-day trial to see what’s new in AfterShot Pro, the world’s fastest RAW photo-editing software.

Share this post

Comments (23)

  • ANDREA Reply

    After shot pro 3 does not read dng photo taken with my phone Huawey mate 20pPro.
    Hope you can solve the issue in a short time as other software can read.
    Thanks in advance

    November 20, 2018 at 3:15 am
    • Adam Reply

      Hello Andrea,

      Thank you for the feedback! We have passed your suggestion on to the AfterShot team, and will be sure that the 20pPro is on the list for consideration in a future update.

      Best,
      Discovery Center Team

      November 23, 2018 at 10:23 pm
  • Anthony Sullivan Reply

    Any chance of addding a camera profile and support for Canon PowerShot G9X Mark II RAW files in a future update?

    November 9, 2018 at 1:00 pm
    • Adam Reply

      Hello Anthony,

      Thanks for the feedback! We don’t have anything specific to announce regarding the G9X MkII just yet, but we can confirm that it is on the list for potential inclusion in a future update. In the meantime, here is a tutorial on creating a custom lens profile which you can use to put together some quick lens corrections for batch editing.

      Hope this helps,
      Discovery Center Team

      November 12, 2018 at 12:18 am
    • John Reply

      I would love to see support for the G9x MK II as well!

      November 14, 2018 at 1:21 pm
  • Rich Hawk Reply

    Was excited to download the 3.5.0.350 update, but alas, still no support for Sony Alpha A7R III raw files! Are you trying to chase me into the arms of Adobe?

    October 14, 2018 at 5:32 pm
    • Adam Reply

      Hello Rich,

      Thanks for the feedback! We are always looking for feedback on which cameras our users have, and have passed the suggestion on to the AfterShot team for their consideration. In the meantime, here is a tutorial on creating a custom lens profile which you can use to put together some quick lens corrections for batch editing.

      Best,
      Discovery Center Team

      October 16, 2018 at 7:52 pm
      • Ron Sherard Reply

        Wondering if the Update 5 has actually been corrected. Notice date still says 2018-10-08.

        October 16, 2018 at 8:01 pm
        • Adam Reply

          Hello Ron,

          Not yet, unfortunately! The problem has proven a little stickier than the ASP team originally thought. We are confident they’ll have the revised update out soon – sorry for the delay!

          Discovery Center Team

          October 22, 2018 at 11:49 pm
  • Svein Arne Grønnevik Reply

    Do you got the camera profile for Canon 6D and 5Ds?

    October 11, 2018 at 11:31 am
  • Elmar Langle Reply

    Same issue as above, tried downloading from email received, from update page, from within AfterShotPro3, double checked correct version but still the same result. I am not going to delete my version to receive a simple update.
    I truly hope this is not the case. My current version is: 3.4.0.297.

    Looking forward to hear from you!

    Thank you!

    Cheers,
    Elmar Langle

    October 10, 2018 at 6:12 pm
    • Adam Reply

      Hello Elmar,

      Thanks for getting in touch! We have confirmed there is an issue with the Update 5 installer for some users, and a fixed version of the installer is due out soon. Sorry for the frustration, and stay tuned!

      Best,
      Discovery Center Team

      October 12, 2018 at 1:28 am
  • Ron Sherard Reply

    After several failed attempts to update with Update 5, I finally had to uninstall AfterShot Pro 3, use regedit and a registry cleaner to clean references to AfterShot Pro 3 and AfterShot 3 (remnants from earlier use of AfterShot 3) from the Windows registry and then reinstall AfterShot Pro 3. After the cleaning and reinstall, AfterShot Pro 3 installed as version 3.5.0.350 and, so far, is working as it should.

    Corel’s solution was to create a new user in Windows 10 and install under that user. That would have been a total waste of computer resources.

    October 10, 2018 at 5:29 pm
    • Adam Reply

      Hello Ron,

      Thanks for the follow-up! We have confirmed that there is an intermittent issue with the Update 5 installer, which is causing some users to have the same error you encountered. Since it only occurred in some cases it took some time to track down, but we will have an updated Update 5 out soon.

      Also, thanks for the solution suggestion! We’ve passed it on to our support team for their review.

      Best,
      Discovery Center Team

      October 12, 2018 at 1:21 am
  • dleydens Reply

    I have had the exact same problem issue as Ron Sherard experienced.

    Downloaded update 5. When run installer get message that computer has not been modified and that another version of this product is installed and told to uninstall then run installer again.

    Is this “update” really requiring me to uninstall Aftershot Pro3 in order to update it? What happens to all of my presets, downloads, scripts, etc. if I do this?

    October 5, 2018 at 10:21 pm
    • Adam Reply

      Hello Dleydens,

      Thanks for getting in touch! We have confirmed there is an issue with the Update 5 installer for some users, and a fixed version of the installer is due out soon. Sorry for the frustration, and stay tuned!

      Best,
      Discovery Center Team

      October 12, 2018 at 1:23 am
      • dleydens Reply

        Is there any idea of when the fixed version of update 3.5 will be available?

        October 29, 2018 at 6:17 pm
        • Adam Reply

          Hello Dleydens,

          The fixed Update 5 is now out! Please let us know if you have any trouble with the new update file.

          Discovery Center Team

          October 31, 2018 at 10:34 pm
  • Ron Sherard Reply

    Downloaded update 5. When run installer get message that computer has not been modified and that another version of this product is installed and told to uninstall then run installer again.

    October 4, 2018 at 4:40 pm
    • Adam Reply

      Hello Ron,

      Are you running AfterShot 3, or AfterShot Pro 3? It is possible you downloaded the wrong update by mistake, which would cause an error message like the one you saw.

      Alternately, in case you did successfully install the update earlier, what is the build number in your AfterShot install? You can find it under Help > System Info. If Update 5 has installed successfully, it should be 3.5.0.350.

      Hope this helps!
      Discovery Center Team

      October 4, 2018 at 9:20 pm
      • Larry Roberts Reply

        I had the same problem Ron did. I checked and the version of Aftershot Pro 3 installed is 3.4…. What is the solution?

        October 10, 2018 at 5:12 pm
        • Adam Reply

          Hello Larry,

          Thanks for getting in touch! We have confirmed there is an issue with the Update 5 installer for some users, and a fixed version of the installer is due out soon. Sorry for the frustration, and stay tuned!

          Best,
          Discovery Center Team

          October 12, 2018 at 1:22 am

Leave a Reply

Your email address will not be published. Required fields are marked *


Sign-up for our newsletter

Sign-up for our newsletter

Get our latest tips, tutorials, and special offers sent weekly to your inbox!

You have Successfully Subscribed!

Pin It on Pinterest

Share This