Transfer photos onto canvas

Transform your favorite photo into an art piece, or perhaps a unique gift idea? In this tutorial, we are going to show you how to transfer photo onto canvas in just a few simple steps. All the supplies you need can be found at your local craft store.

With this project, you’ll end up having a beautiful piece of canvas, perfect for home decoration, and also a great gift for holidays or special events.

How to transfer photos onto canvas in 5 easy steps

There are 5 basic steps to this photo project. Watch the video to see how it’s done and follow along with the detailed instructions below.

Step 1
Assemble your materials
Step 2
Get your photo ready
Step 3
Transfer your photo
Step 4
Rub off the paper
Step 5
Add texture effect

Step 1
Assemble your materials

You will need the following materials for this project:

  • Photo
  • Canvas
  • PaintShop Pro or another photo editing program
  • Scissors
  • Smoothing tool (a brayer if you have one, but a credit card or any plastic card work fine)
  • Gel Medium or Mod Podge
  • Brush
  • Rag or sponge
  • A bowl of water
Step 2
Get your photo ready
  • When the image is transferred to the canvas, it will be reversed so you will need to use your photo editing software to reverse the image first, especially if there is any text or other part of your image that shouldn’t be displayed backward
  • You may also need to resize your photo and/or crop it to the same dimensions as your canvas
  • Print your photo on regular printer/photo copier paper using a laser jet printer, or make a photocopy of the printed photo (a photo printed on photo paper or using an ink jet printer WON’T work)
Step 3
Transfer your photo onto canvas
  • Cut out your photo from the printed paper
  • Apply an even layer of gel medium to the entire surface of the canvas using a brush
  • Place and press your photo face-down onto the canvas
  • Use a credit card or other smoothing tool to gently smooth out the photo and remove any air bubbles
  • Turn the canvas over and press along the backside of the canvas to make sure the photo is adhered.
  • Let it sit overnight or at least 5 hours to dry completely.
Step 4
Remove the paper
  • Use a sponge and water to wet the paper.
  • Then use your fingers to gently rub the paper to remove it.
  • Repeat this process as many times as necessary to get all the bits of paper off. Remember not to press too hard or you might scrape away the image underneath.
  • Use a clean rag to lightly wipe the scrap of paper fibers over the photo.
  • Once it’s done, let the canvas dry completely.
Step 5
Add texture effect
  • You can stop right here if you are satisfied with the look. Or you can follow the steps below to add a final touch.
  • Apply Mod Podge or gel medium to the canvas. Use your brush to apply an even layer to the entire surface, to top it with a clear coat.

Comments (9)

Reader Interactions

Comments

  1. Naghmeh says

    Hi
    Thanks for sharing this. It’s very helpful.
    I was just wondering what if I want to copy the same printed image on a canvas that I already painted the background with acrylic.
    If I use mod podge to transfer the imga or spong to remove the paper, would it damage the painted background? Do you have any advice for this?

    Thanks in advance for helping me out.

    • gilliandarby says

      Hi,

      I don’t know if this would work, I have a feeling that either the photo wouldn’t transfer properly onto the painted surface and/or the process would damage the painted background. If you have an extra scrap of canvas, you could test out the process first, before risking damage to your painted canvas.

      Thanks,
      The Discovery Center team

    • Aims says

      I think whether it damages the paint/image would depend on how dry the paint is, how textured it is, and how hard you rub off the paper afterwards. The other thing that I’d be concerned with, is that the image is transparent. If you have a dark tinted paint behind the image, it will make your whole image darker and harder to discern. Like if your background was red, and you were putting a picture with yellow in it, the image will look orange. If you already have a colourful or detailed background, I’d just straight decoupage it on (glue/mod podge it on, image side up).

  2. Linda Boris says

    I tried this technique and unfortunately some of the image rubbed off, particularly around the edges. What caused this, do you think and how can I prevent this?

  3. Jayita Dana(www.jayitasoulart.com) says

    I tried Transferring a laser photo onto a painted textured canvas, the photo dint transfer well at all. So I had to smoothen the textured part and then transferred the photo.

  4. Susan Findlay says

    After removing glue,picture turned out nice,but now I am letting it dry. The picture is turning white glue covered again. Why is that ?