New RAW Profiles Available for Panasonic!

Comments

1. Stuart Svoboda says

   August 25, 2018 at 1:22 pm

   My two latest cameras are the Panasonic Lumix DMC-FZ1000 and the Olympus TG-5. You have profiles for the FZ300 (the FZ1000’s predecessor) and the FZ2000/2500 (Its successor). Please provide one for the FZ1000 (identical to the Leica V-Lux Typ 114, which also has no profile). These are great cameras (in reviews and in practice) that need support! Also, there’s a profile listed for the Olympus TG-4 (the TG-5’s predecessor), but no apparent way to install it. There’s no profile shown for the TG-5, but since they use the same lens (but a very different sensor and firmware), perhaps one profile would work for both. Thanks in advance for addressing this!

   Reply

   • Adam says

     August 27, 2018 at 10:11 pm

     Hello Stuart,

     Thank you for the feedback! We have passed your comments on to the AfterShot team, and have made sure the FZ1000 and TG-5 are on the list of camera models up consideration for future updates.

     Discovery Center Team

     Reply

2. Mark Cooper says

   October 3, 2018 at 6:17 pm

   When will there be RAW support for the DC-ZS70 ? Ive requested this several times ! !

   Reply

   • Adam says

     October 4, 2018 at 9:31 pm

     Hello Mark,

     We don’t have anything to announce regarding DC-ZS70 support just yet, but we passed your comments on to the AfterShot team and have made sure it is on the list of camera models up consideration for future updates.

     Best,
     Discovery Center Team

     Reply

     • Bill Johnson says

       October 26, 2018 at 6:59 am

       Adam: I’ve recently acquired the Panasonic ZS50. Can I expect/hope that you’ll have a Camera Profile for this camera in the foreseeable future?

       Reply

       • Adam says

         October 29, 2018 at 9:33 pm

         Hello Bill,

         Unfortunately we don’t have anything to announce for the Panasonic ZS50 yet. We have passed your comments on to the AfterShot team to make sure it is on the list of camera models up consideration!

         Best,
         Discovery Center Team

         Reply

3. Allan Carr says

   October 4, 2018 at 12:40 pm

   I’m another FZ1000 owner who is waiting for a profile. Any indication on when this is likely to be available. It seems strange that a profile was produced for the F 2000 but not the FZ1000

   Reply

   • Adam says

     October 4, 2018 at 9:13 pm

     Hello Allan,

     Have you installed the latest update for AfterShot Pro 3? The FZ1000 is now listed as a supported camera, so provided your AfterShot install is fully up to date, there should be a camera profile ready for you to use!

     Discovery Center Team

     Reply

     • Dave says

       November 7, 2019 at 8:58 pm

       I have been waiting a long time for the FZ1000 camera profile as well. Now running the most current version of AfterShot Pro v3.6.0.380 and still no camera profile for the FZ1000. What gives?

       Thanks.

       Reply

4. Stephen Duncan says

   January 31, 2023 at 12:09 am

   It’s ridiculous that they don’t support the FZ1000. What are they thinking. It is one of the most popular bridge cameras on the market. Very disappointed.

   Reply

   • gilliandarby says

     February 6, 2023 at 5:19 pm

     Hi Stephen,
     Please visit https://www.aftershotpro.com/en/feedback/ and click on the “Submit your feedback” button. Here you can request support for your camera.
     Best regards,
     The Discovery Center team

     Reply